Evaluation of the active concentration of two disinfectants based on glutaraldehyde and benzalkonium chloride and antimicrobial activity in vitro against Salmonella Heidelberg and Salmonella Typhimurium

Biosecurity, cleaning and disinfection of swine and poultry facilities are fundamental for the reduction of pathogenic microorganisms of importance for public and animal health. The objective of this work was to compare the levels of active ingredient described on the label and the real levels detected in high-performance liquid chromatography (HPLC) of two disinfectants., then evaluate the antimicrobial activity since, following the Germicidal Sanitizing Action and Disinfectant Detergent (Official Method AOAC 960.09) in four different dilutions with the presence of 3% organic matter during 15 min of contact, against Salmonella Heidelberg and Salmonella Typhimurium (ST). The product "A" presents active levels of agreement according to the label. The content of quantified assets for product "B" was lower than that recorded on the label. The disinfectant "A" was effective in microbiological evaluation while the disinfectant "B" had microbiocidal activity compromised by the deficit of assets.

Oral Use of Phenytoin to Reduce Calcification in Bovine Pericardium and Porcine Aortic Leaflets Implants in Rats

Abstract Introduction: This study aims to test the effect of phenytoin as an inhibitor of the process of dystrophic calcification in bovine pericardium and porcine leaflets implanted in the subcutaneous tissue of rats. Methods: Isolated segments of biomaterials were implanted subcutaneously in young rats. The study groups received 500 mg phenytoin per kilogram of diet per day. After 90 days, samples were collected and quantitative calcification assessment by optical microscopy, radiological studies with mammography, and atomic emission spectrometry were performed. Results: Inflammatory reaction was a frequent finding in all groups when analyzed by optical microscopy. The calcium level assessed by atomic absorption spectrophotometry was significantly lower in the study groups using phenytoin compared to the control groups (control bovine pericardium group X=0.254±0.280 µg/mg; study bovine pericardium group X=0.063±0.025 µg/mg; control porcine aortic leaflets group X=0.640±0.226 µg/mg; study porcine aortic leaflets group X=0.056±0.021 µg/mg; P<0.05). Radiologic studies revealed a statistically significant difference between the groups treated with and without phenytoin (not only regarding the bovine pericardium but also the porcine leaflets). Conclusion: The results obtained suggest that phenytoin reduces the calcification process of bovine pericardium segments and porcine aortic leaflets in subdermal implants in rats; also, the incidence of calcification in bovine pericardium grafts was similar to that of porcine aortic leaflets.

Gasparyan method of total autologous reconstruction of the aortic valve

Abstract In this case report, I describe a new technique for total reconstruction of the aortic valve with autologous pericardium. The parameters of the cusps were calculated using very simple formulas after measurement of the aortic root intercommissural distances. Glutaraldehyde-treated pericardium was trimmed along the marked line, leaving 2 mm of tissue along the fibrous annulus attachment margin for the suture and small wings on both commissural margins to secure the commissural coaptation between right and noncoronary cusps. The annular margin of each pericardial cusp was sutured to the corresponding fibrous annulus with running 4/0 polypropylene suture. The commissures of pericardial patch and the commissural coaptation between right and noncoronary cusps were secured with mattress 4/0 polypropylene sutures. The coaptation of the three cusps was checked with negative pressure on the left ventricular vent before closure of the aortotomy. Intraoperative transesophageal echocardiogram revealed a peak pressure gradient of 10 mmHg and trivial aortic regurgitation.

Immediate outcomes of aortic valve neocuspidization with glutaraldehyde-treated autologous pericardium: a multicenter study

Abstract Objective: To determine the feasibility of aortic valve neocuspidization (AVNeo) with glutaraldehyde-treated autologous pericardium. Methods: One hundred and seventy (170) AVNeo (84 males/86 females) were performed from January 2017 through March 2019 in three centers. All the records were prospectively collected and retrospectively reviewed. Results: Most of the patients were older than 60 years and over 95% were operated for aortic stenosis. Preoperatively, pressure gradients were 69.9±21.3 mmHg for patients with aortic stenosis, and the surgical annular diameter was 21.0±2.0 mm for all patients. Effective orifice area (EOA) and indexed EOA (iEOA) averaged 0.7±0.3 cm2 and 0.4±0.2 cm2/m2 for patients with aortic stenosis before surgery, respectively. There was no conversion to prosthetic aortic valve replacement. Eight patients needed reoperation for bleeding, but no patient needed reoperation due to early infective endocarditis. There were five in-hospital deaths due to noncardiac cause. Compared to preoperative echocardiographic measurements, postoperative peak pressure gradient decreased significantly (-58.7±1.7 mmHg; P<0.001) and reached 11.2±5.6 mmHg, and mean pressure gradient also decreased significantly (-36.8±1.1 mmHg; P<0.001) and reached 6.0±3.5 mmHg. Accordingly, EOA and iEOA increased significantly 2.0 cm2 and 1.0 cm2/m2 (both P<0.001) to reach 2.7±0.6 cm2 and 1.4±0.3 cm2/m2 after surgery, respectively, with minimal significant aortic regurgitation (0.6% > mild). Conclusion: AVNeo is feasible and reproducible with good clinical results. Hemodynamically, AVNeo produces immediate postoperative low-pressure gradients, large EOA, and minimal regurgitation of the aortic valve. Further studies are necessary to evaluate mid- and long-term evolution.

Aortic valve neocuspidization with glutaraldehyde-treated autologous pericardium (ozaki procedure) - a promising surgical technique

Abstract In cases of aortic valve disease, prosthetic valves have been increasingly used for valve replacement, however, there are inherent problems with prostheses, and their quality in the so-called Third World countries is lower in comparison to new-generation models, which leads to shorter durability. Recently, transcatheter aortic valve replacement has been explored as a less invasive option for patients with high-risk surgical profile. In this scenario, aortic valve neocuspidization (AVNeo) has emerged as another option, which can be applied to a wide spectrum of aortic valve diseases. Despite the promising results, this procedure is not widely spread among cardiac surgeons yet. Spurred on by the last publications, we went on to write an overview of the current practice of state-of-the-art AVNeo and its results.

Twenty-four-month clinical performance of different universal adhesives in etch-and-rinse, selective etching and self-etch application modes in NCCL - a randomized controlled clinical trial

Abstract Objective The aim of this randomized, controlled, prospective clinical trial was to evaluate the performances of two different universal adhesives and one etch-rinse adhesive for restoration of non-carious cervical lesions (NCCLs). Material and Methods Twenty patients with at least seven NCCLs were enrolled. Lesions were divided into seven groups according to adhesive systems and application modes: GSE: GLUMA Universal-self-etch, GSL: GLUMA Universal-selective etching, GER: GLUMA Universal-etch-and-rinse, ASE: All-Bond Universal-self-etch, ASL: All-Bond Universal-selective etching, AER: All-Bond Universal-etch-and-rinse, SBE (Control): Single Bond2-etch-and-rinse. A total of 155 NCCLs were restored with a nano hybrid composite (Tetric N-Ceram). Restorations were scored with regard to retention, marginal discoloration, marginal adaptation, recurrent caries and post-operative sensitivity using modified United States Public Health Service (USPHS) criteria after one week, 6, 12 and 24 months. Statistical evaluations were performed using Chi-square tests (p=0.05). Results The recall rate was 81.9% after the 24-month follow-up. The cumulative retention rates for self-etch groups (GSE: 72.2%, ASE:75%) were significantly lower than other experimental groups (GSL: 93.7%, GER: 100%, ASL: 94.1%, AER: 100%, SBE: 100%) at the 24-month follow-up (p<0.05). Regarding marginal adaptation and marginal discoloration, GSE and ASE groups demonstrated more bravo scores after 6 and 12-month observations but differences were not significant (p>0.05). Only one restoration from ASL group demonstrated post-operative sensitivity at 6 and 12-month observations. No secondary caries was observed on the restorations at any recall. At the end of 24-month observations, no significant differences were detected among groups regarding any of the criteria assessed, except retention. Conclusion GLUMA Universal and All-Bond Universal showed better results in etch-and-rinse and selective etching mode compared to the self-etch mode regarding retention. Etch-and-rinse and selective etching application modes of the current universal adhesives tended to provide better clinical outcomes considering the criteria evaluated at the end of 24-month evaluation.

Efectividad de Lysol y Glutaraldehído al 2% en piezas de mano de alta velocidad después de ser sometidas a limpieza mecánica / Effectiveness of Lysol and Glutaraldehyde 2 % in high-speed handpieces after being subjected to mechanical cleaning / Eficácia de Lysol e Glutaraldehyde ao 2% em peças de alta rotaçãoapós serem submetidas a limpeza mecânica

La desinfección química es un procedimiento importante utilizado en el ámbito odontológico que tiene como fin evitar la propagación de microorganismos patógenos que puedan afectar a la salud. Objetivo: Determinar la efectividad desinfec-tante del agente Lysol y Glutaraldehído al 2% en aerosol en piezas de mano de alta velocidad en estudiantes de noveno semestre que acuden a Clínica Integral de la Facultad de Odontología de la Universidad Central del Ecuador (FO-UCE) período 2017. Materiales y métodos: Estudio experimental in vitro. La muestra se obtuvo de 40 piezas de mano de alta velocidad antes y después de someter a las turbinas a un proceso de desinfección mediante dos agentes aplicados en aero-sol Lysol y Glutaraldehído al 2%. Las muestras fueron tomadas de dos sitios, cabezal y mango. Después se transportaron las muestras al laboratorio de Microbiología de la FO-UCE en tubos con tioglicolato, posteriormente fueron sembradas en el medio Agar sangre e incubadas por 48 horas a 37° para finalmente observar la formación de Unidades Formadoras de colonias. Fueron utilizados los análisis estadísticos de ANOVA y Tukey con un nivel de significancia de 5%. Resultados: Se observó un efecto en la reducción bacteriana del glutaraldehído de 0,6 UFC y del lysol de 1,3 UFC después de su uso. Tanto el glutaraldehído como el lysol mostraron diferencias significativas antes y después de su uso (p<0.001), sin existir diferencias entre ambos después de la desinfección mecánica con ambas sustancias en aerosol (p=1,0). Conclusión: El Glutaraldehído y el Lysol en aerosol fueron efectivos en la desinfección de piezas de mano de alta velocidad.

Chemical disinfection is an important procedure used in the dental field that aims to prevent the spread of pathogenic micro-organisms that may affect health. Objective: To determine the disinfectant effectiveness of the Lysol and Glutaraldehyde 2% agent in aerosol in high-speed handpieces in ninth semester students who attend the Integral Clinic of the School of Dentistry of the Central University of Ecuador (FO-UCE) period 2017. Materials and methods: In vitro experimental study. The sample was obtained from 40 high-speed handpieces before and after subjecting the turbines to a disinfection process using two agents applied in aerosolized Lysol and Glutaraldehyde 2%. The samples were taken from two sites, head and handle. The samples were then transported to the FO-UCE Microbiology laboratory in tubes with thioglycolate, subsequently seeded in the blood agar medium and incubated for 48 hours at 37 ° to finally observe the formation of colony forming units. The statistical analyzes of ANOVA and Tukey with a significance level of 5% were used. Results: An effect on the bacterial reduction of 0.6 CFU glutaraldehyde and 1.3 CFU lysol was observed after use. Both glutaraldehyde and lysol showed significant differences before and after use (p <0.001), with no differences between the two after mechanical disinfection with both aerosol substances (p = 1.0). Conclusion: Glutaraldehyde and Lysol aerosol were effective in disin-fecting high speed handpieces.

A desinfecção química é um procedimento importante utilizado no campo odontológico que visa prevenir a disseminação de microrganismos patogênicos que podem afetar a saúde. Objetivo: Determinar a eficácia do desinfetante do agente lisol e glutaraldeído ao 2% em aerossol em peças de mão de alta rotação em alunos do nono semestre que freqüentam a Clíni-ca Integral da Faculdade de Odontologia do período 2017 da Universidade Central do Equador (FO-UCE). Materiais e métodos: Estudo experimental in vitro. A amostra foi obtida de 40 peças mão de alta rotação antes e depois de submeter as turbinas a um processo de desinfecção utilizando dois agentes em aerossol aplicados como o Lysol e Glutaraldeído a 2%. As amostras foram retiradas de dois locais, cabeça e alça. As amostras foram então transportadas para o laboratório de Microbiologia da FO-UCE em tubos com tioglicolato, posteriormente semeadas em meio ágar sangue e incubadas por 48 horas a 37 ° para finalmente observar a formação de unidades formadoras de colônias. Foram utilizadas as análises esta-tísticas de ANOVA e Tukey com nível de significância de 5%. Resultados: Observou-se um efeito na redução bacteriana de 0,6 UFC do glutaraldeído e 1,3 UFC do lysol após o uso. Tanto o glutaraldeído quanto o lisol apresentaram diferenças significativas antes e após o uso (p <0,001), não havendo diferenças entre os dois após a desinfecção mecânica com ambas as substâncias em aerossol (p = 1,0). Conclusão: O glutaraldeído e o aerossol Lysol foram eficazes na desinfecção de peças mão de alta rotação.

Glutaraldehyde test for the rapid diagnosis of pulmonary and extra-pulmonary tuberculosis in an area with high tuberculosis incidence

BACKGROUND Tuberculosis (TB) remains one of the leading causes of morbidity and mortality worldwide. The primary method for controlling TB is the rapid and accurate identification of infected individuals. Immune response exploitation represents one of the main methods used for early TB diagnosis; however, few studies have reported that whole blood originating from TB-infected patients gels faster in the presence of aldehyde than blood originating from healthy subjects, which is the focus of the current study. OBJECTIVES The study objectives are to determine the diagnostic value of a glutaraldehyde test (GT) in pulmonary tuberculosis (PTB) and extra-pulmonary tuberculosis (EPTB) and to assess its performance compared with light-emitting diode fluorescence microscopy (LED-FM). MATERIALS AND METHODS This study included 272 specimens (176 suspected PTB specimens and 96 suspected EPTB specimens). Of the 272 patients, 98 patients had TB infection confirmed by culture (64 PTB cases and 34 EPTB cases), and 174 patients had no TB infection. The gold standard technique (culture) was used as reference to verify the GT's performance. RESULTS The GT showed a high sensitivity (96.9%) and specificity (82.1%) for PTB with a good positive predictive value (PPV = 75.6%) and negative predictive value (NPV = 97.9%). For EPTB, the GT showed a sensitivity of 91.2% and a specificity of 77.4%, with PPV = 68.9% and NPV = 94.1%. LED-FM had lower sensitivities for PTB (65.6%) and EPTB (42.1%) and an excellent specificity of 100%, with PPV = 100% and NPV = 100%. CONCLUSION We concluded that GT is rapid, easy, simple and cost-effective and does not require qualified personnel with a specific background or sophisticated equipment like molecular biology or mycobacterium-specific genotyping techniques. These qualities make the GT attractive for use in low- and high-income countries in addition to other conventional methods, particularly culture, which continues to be the gold standard.

Effect of two desensitizing agents on dentin permeability in vitro

Abstract Objective The aim of this in vitro study was to investigate the effect of two desensitizing agents and water on hydraulic conductance in human dentin. Material and Methods GLUMA Desensitizer PowerGel (GLU) contains glutaraldehyde (GA) and 2-hydroxyethyl methacrylate (HEMA), and Teethmate Desensitizer (TD) is a powder comprising tetracalcium phosphate (TTCP) and dicalcium phosphate anhydrous (DCPA) that is mixed with water. Deionized water was used as a negative control (CTR). Thirty discs with a thickness of 1.2 mm were cut from the coronal dentin of the third molars and cleaned with 0.5 M EDTA (pH 7.4). After being mounted in a split-chamber device, the discs were pressurized with water at 1 kPa and 3 kPa in order to measure flow rates with a highly sensitive micro-flow sensor and to calculate hydraulic conductance as a baseline value (BL). Following the application of GLU, TD, and CTR (n=10), hydraulic conductance was remeasured with intermittent storage in water after 15 min, 1 d, 1 w, and 1 m. Reduction in permeability (PR%) was calculated from hydraulic conductance. Data were statistically analyzed using nonparametric methods (α<0.05). Representative discs were inspected by SEM. Results PR% for GLU and TD were 30-50% 15 min and 1 m after their application. Post hoc tests indicated that PR% of CTR was significantly greater than those of GLU and TD at all time points tested. The PR% of GLU and TD were not significantly different. SEM examinations showed noncollapsed collagen meshes at the tubular entrances after GLU, and crystalline precipitates occluding the tubular orifices after TD, whereas CTR specimens showed typical patterns of etched dentin. Conclusions The present study on hydraulic conductance in dentin discs treated with two chemically different desensitizing agents and water as a control demonstrated that both products may be characterized as effective.

The effect of prolonged storage and disinfection on the dimensional stability of 5 vinyl polyether silicone impression materials

PURPOSE: Vinyl polyether silicone (VPES) has a different composition from other elastomeric impression materials as it combines vinyl polysiloxane (VPS) and polyether (PE). Therefore, it is important to study its properties and behavior under different test conditions. This study investigated the dimensional stability of 5 VPES consistencies when stored for up to 2 weeks, with and without using a standard disinfection procedure. MATERIALS AND METHODS: 40 discs of each VPES consistency (total 200) were made using a stainless steel die and ring as described by ANSI /ADA specification No. 19. 20 discs of each material were immersed in a 2.5% buffered glutaraldehyde solution for 30 minutes. Dimensional stability measurements were calculated immediately after fabrication and repeated on the same discs after 7 and 14 days of storage. The data was analyzed using two-way ANOVA with a significance level set at α = 0.05. RESULTS: The discs mean contraction was below 0.5% at all test times ranging from 0.200 ± 0.014 to 0.325 ± 0.007. Repeated measures ANOVA showed a statistically significant difference after 2-week storage between the disinfected and non-disinfected groups (P < .001). Although there was no statistically significant difference between the materials at the time of fabrication, the contraction of the materials increased with storage for 1 and 2 weeks. CONCLUSION: The dimensional changes of VPES impression discs after disinfection and prolonged storage complied with ANSI/ADA standard. The tested VPES impression materials were dimensionally stable for clinical use after disinfection for 30 minutes in glutaraldehyde and storage for up to 2 weeks.

Gelatin-based microspheres crosslinked with glutaraldehyde and rutin oriented to cosmetics

ABSTRACT Glutaraldehyde (GTA) has been extensively used as a gelatin crosslinking agent, however, new natural ones have been suggested as more biocompatible. Polyphenols are possible candidates and the flavonols, such as rutin (RUT), also exhibit potential synergism with sunscreens and antioxidant agents used in cosmetics. In this work, gelatin microspheres (M0) were obtained and crosslinked with GTA 10 mM (MG) or RUT 10 mM (MR), dissolved in acetone:NaOH 0,01M (70:30 v/v). MG exhibited crosslinking extent of 54.4%. Gelatin, M0, MG and MR did not elicit any signs of skin damage, regarding the formation of erythema, the barrier function disruption and negative interference in the stratum corneum hydration. Oily dispersions containing M0, MG or MR, isolated or combined with benzophenone-3 or octyl methoxycinnamate, suggested that the microspheres, at a 5.0% w/w, had no additional chemical or physical photoprotective effect in vitro. Crosslinking with RUT had occurred, but in a lower degree than GTA. Microspheres had not improved sun protection parameters, although, non-treated gelatin interfered positively with the SPF for both UV filters. The in vivo studies demonstrated that these materials had very good skin compatibility.

Estudio de dos técnicas de desinfección en un material de impresión / Study of the effect of two disinfection techniques on an impression material

El controlar la infección es una obligación profesional de fundamental importancia así como la reducción del riesgo de contaminacióncruzada durante los procedimientos clínicos para la calidad y la seguridad en la práctica dental. Material y métodos: Un total de 27 impresiones individuales fueron obtenidas de pacientes, las cuales se dividieron en tres grupos para su tratamiento. Grupo control: nueve impresiones individuales usando una silicona por adición, sin desinfectar,fueron sumergidas en agua bidestilada durante 10 minutos. Grupo A: nueve impresiones individuales fueron sumergidas en glutaraldehído al 2 por ciento durante 10 minutos. Grupo B: nueve impresiones individuales fueron esterilizadas mediante autoclave a 134 oC por 15 minutos a 15 psi. Resultados: Después de realizar el conteo bacteriano respectivo de cada grupo de estudio, se observó el crecimiento bacteriano en dosgrupos, siendo notoria la falta de crecimiento en las muestras del grupoB, mientras que en el grupo control la cuenta fue mayor que en el grupo A. Conclusiones: El lavado de la impresión reduce la cantidad de microorganismos presentes mas no la desinfecta. El glutaraldehído al 2 por ciento fue eficaz en la eliminación de microorganismos no esporulados provenientes de la cavidad oral presentes en las impresiones conmaterial elastomérico. La eliminación completa de microorganismos puede ser lograda mediante la esterilización de las impresiones con material elastomérico...

Lyophilized allografts without pre-treatment with glutaraldehyde are more suitable than cryopreserved allografts for pulmonary artery reconstruction

Various methods are available for preservation of vascular grafts for pulmonary artery (PA) replacement. Lyophilization and cryopreservation reduce antigenicity and prevent thrombosis and calcification in vascular grafts, so both methods can be used to obtain vascular bioprostheses. We evaluated the hemodynamic, gasometric, imaging, and macroscopic and microscopic findings produced by PA reconstruction with lyophilized (LyoPA) grafts and cryopreserved (CryoPA) grafts in dogs. Eighteen healthy crossbred adult dogs of both sexes weighing between 18 and 20 kg were used and divided into three groups of six: group I, PA section and reanastomosis; group II, PA resection and reconstruction with LyoPA allograft; group III, PA resection and reconstruction with CryoPA allograft. Dogs were evaluated 4 weeks after surgery, and the status of the graft and vascular anastomosis were examined macroscopically and microscopically. No clinical, radiologic, or blood-gas abnormalities were observed during the study. The mean pulmonary artery pressure (MPAP) in group III increased significantly at the end of the study compared with baseline (P=0.02) and final [P=0.007, two-way repeat-measures analysis of variance (RM ANOVA)] values. Pulmonary vascular resistance of groups II and III increased immediately after reperfusion and also at the end of the study compared to baseline. The increase shown by group III vs group I was significant only if compared with after surgery and study end (P=0.016 and P=0.005, respectively, two-way RM ANOVA). Microscopically, permeability was reduced by ≤75% in group III. In conclusion, substitution of PAs with LyoPA grafts is technically feasible and clinically promising.

Ultrarush schedule of subcutaneous immunotherapy with modified allergen extracts is safe in paediatric age

BACKGROUND: Traditional subcutaneous immunotherapy up dosing with allergenic extracts has been shown to be associated with frequent adverse reactions. In recent studies it has been demonstrated that using modified extracts, namely allergoids, it is a safe and effective procedure particularly on accelerated schedules. However data assessing its safety in paediatric age is scarce. OBJECTIVE: To evaluate the safety profile in paediatric population of using modified allergen extracts, in an ultrarush schedule, to reach the maintenance dose in the first day. METHODS: We included children undergoing treatment with subcutaneous immunotherapy during a five-year period, using modified aeroallergen extracts, depigmented, polymerized with glutaraldehyde and adsorbed on aluminium hydroxide using an ultrarush induction phase. The type of adverse reactions during the ultrarush protocol was recorded. RESULTS: We studied 100 paediatric patients (57 males) with a mean age of 11.6 years (5 to 18 years; standard deviation, 3.3), all with moderate to severe persistent rhinitis, with or without allergic conjunctivitis, asthma and atopic eczema, sensitized to mites and/or pollens. All reached the maintenance dose of 0.5 mL in the first day, except 1 child. During the ultrarush protocol the total number of injections was 199. There were 21 local adverse reactions in 11 patients, 11 immediate and 10 delayed; from those, had clinical relevance 1 immediate and 4 delayed. Systemic reactions were recorded in 2 cases, both immediate and mild. CONCLUSION: The ultrarush protocol, without premedication, was a safe alternative to be used in paediatric age during the induction phase of subcutaneous immunotherapy using allergoid depigmented extracts.

Biomodifying effect of epigallocatechin-3-gallate on dentine substrate splicing surface / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the effect of epigallocatechin-3-gallate (EGCG) on biomodification of demineralized dentine substrate, in its permeability, hydrophobicity, and inhibition ability to collagen enzymatic degradation.</p><p><b>METHODS</b>The dentine substrates were treated with simulated pulpal pressure created by mixtures of 0.02%, 0.1% EGCG/bovine serum albumin (BSA) in acidic environment (pH4.4) for 48 h. A fluid-transport model was used to measure the fluid permeability through demineralized dentine substrate. Positive replicas of dentine substrate were fabricated before and after being subjected to acidic environment for scanning electron microscope (SEM) examination. The blank group contained no EGCG and the positive group were treated with Gluma desensitizer. Static contact angle measurements on demineralized dentin and 0.1% EGCG primed dentin were performed by contact angle analyzer. The priming time were 60 s, 120 s, 0.5 h, 1 h. Dentine specimens bonded with Adper single bond 2 were subjected to 100 mg/L collagenase and observed under SEM. Resin-bonded specimens (with 0.02%, 0.1%, 0.5% EGCG priming, or without EGCG priming) were created for micro-tensile bond strength evaluation (MTBS). Resin-bonded specimens after thermol cycling were created for MTBS evaluation.</p><p><b>RESULTS</b>The fluid permeability in the blank control group increased ([151.3±22.3]%), the fluid permeability in 0.1% EGCG/BSA group decreased ([23.7±6.3]%). Compared to the blank control group, the contact angle of 120 s, 0.5 h, 1 h groups increased by 31.0%, 53.5%, 57.8% in deep dentin and 37.4%, 59.3%, 62.4% in shallow dentin. The SEM examination showed that 0.1% and 0.5% EGCG priming for 120 s significantly increased dentin collagen's resistance to collagenase. The immediate MTBS of 0.1% and 0.5% EGCG groups were (29.4±4.8) and (19.8± 4.9) MPa. After thermol cycling, the MTBS of 0.1% and 0.5% EGCG groups were (19.9±5.1) and (15.3± 6.3) MPa.</p><p><b>CONCLUSIONS</b>Under acidic environment (pH4.4), the 0.1% EGCG can reduce dentine permeability under acidic environment. The 0.1% EGCG can increase hydrophobicity of dentin substrate, and strengthen dentin substrate's resistance to collagenase hydrolysis, thus increased the resin-dentin bonding durability.</p>

Is Alcohol Swabbing Sufficient to Clean Otoscopes in Hospitals? / 대한이비인후과학회지

BACKGROUND AND OBJECTIVES: An otoscope is a basic instrument used by otorhinolaryngologists. An inappropriately sterilized otoscope has been reported to be a possible bacterial vector for infection. In this regard, we decided to investigate contaminated otoscopes for possible bacterial contamination and evaluate the efficacy of the otoscope disinfection methods. MATERIALS AND METHOD: We randomly drew 22 otoscope cones from university hospitals and 10 from private hospitals. Cones were divided into three groups accordingly to their sterilization methods: group 1 was wiped with 70% isopropyl alcohol, group 2 was soaked for 20 min in 70% isopropyl alcohol, and group 3 was soaked in CIDEX solution. The samples were cultured twice, first before the disinfection process and then after the disinfection process. Otoscopes were cleaned for a week by employing these techniques. RESULTS: Most of the pre-sterilized otoscopes (20/22) were obtained from the hospitals which demonstrated contamination with microorganisms. Staphylococcus was the most common bacteria found (16/22). After a week of cleansing, no bacteria were seen in group 1 (0%, 0/8), whereas group 2 (14.3%, 1/7), and group 3 (28.6%, 2/7) still showed remaining microorganisms. The three methods were significantly effective on sterilizing microorganisms. CONCLUSION: An otoscope can be a vector for spreading infection. We found that disinfection by alcohol-swabbing alone is sufficient for sterilizing otoscope cones. Clinically, this information may be useful to otorhinolaryngologists. However, further studies are required to establish the most appropriate disinfection protocol to prevent infection from microorganisms.

Sterilizing elastomeric chains without losing mechanical properties. Is it possible?

OBJECTIVE: To investigate the effects of different sterilization/disinfection methods on the mechanical properties of orthodontic elastomeric chains. METHODS: Segments of elastomeric chains with 5 links each were sent for sterilization by cobalt 60 (Co60) (20 KGy) gamma ray technology. After the procedure, the elastomeric chains were contaminated with clinical samples of Streptococcus mutans. Subsequently, the elastomeric chains were submitted to sterilization/disinfection tests carried out by means of different methods, forming six study groups, as follows: Group 1 (control - without contamination), Group 2 (70°GL alcohol), Group 3 (autoclave), Group 4 (ultraviolet), Group 5 (peracetic acid) and Group 6 (glutaraldehyde). After sterilization/disinfection, the effectiveness of these methods, by Colony forming units per mL (CFU/mL), and the mechanical properties of the material were assessed. Student's t-test was used to assess the number of CFUs while ANOVA and Tukey's test were used to assess elastic strength. RESULTS: Ultraviolet treatment was not completely effective for sterilization. No loss of mechanical properties occurred with the use of the different sterilization methods (p > 0.05). CONCLUSION: Biological control of elastomeric chains does not affect their mechanical properties. .

OBJETIVO: verificar os efeitos de diferentes métodos de esterilização/desinfecção nas propriedades mecânicas de elásticos ortodônticos em cadeia. MÉTODOS: segmentos de elástico em cadeia com 5 elos cada foram enviados para esterilização em radiação gama com cobalto 60 (20 KGy). Após esterilização, esses foram contaminados com amostras clínicas de Streptococcus mutans. Passado esse período, foram submetidos aos testes de esterilização/desinfecção por diferentes métodos, formando seis grupos de estudo, assim denominados: Grupo 1 (controle - sem ter sido contaminado), Grupo 2 (álcool 70°GL), Grupo 3 (autoclave), Grupo 4 (ultravioleta), Grupo 5 (ácido peracético) e Grupo 6 (glutaraldeído). Após esterilização/desinfecção, avaliou-se a efetividade desses métodos, por meio de contagem de unidades formadoras de colônias por mL (UFC/mL), e as propriedades mecânicas desses materiais. Utilizou-se o teste t de Student para avaliar o número de UFC, além do ANOVA e, posteriormente, do teste de Tukey para avaliação da força. RESULTADOS: verificou-se que o ultravioleta não obteve eficácia total quanto à esterilização. E não ocorreu perda das propriedades mecânicas dos elásticos, com os diferentes métodos de esterilização utilizados (p > 0,05). CONCLUSÃO: o controle biológico de elásticos em cadeia não interfere nas suas propriedades mecânicas. .

The Influence of Glutaraldehyde Concentration on Electron Microscopic Multiple Immunostaining

The present study was aimed to evaluate the influence of glutaraldehyde (GA) concentration on multiple electron microscopic (EM) immunostaining using pre-embedding peroxidase and post-embedding immunogold method. Influence of various concentrations of GA included in the fixative on immuoreactivity was assessed in the multiple immunostaining using antisera against anti-transient receptor potential vanilloid 1 (TRPV1) for peroxidase staining and anti-GABA for immunogold labeling in the rat trigeminal caudal nucleus. Anti-TRPV1 antiserum had specificity in pre-embedding peroxidase staining when tissues were fixed with fixative containing paraformaldehyde (PFA) alone. Immunoreactivity for TRPV1 was specific in tissues fixed with fixative containing 0.5% GA at both perfusion and postfixation steps, though the immunoreactivity was weaker than in tissues fixed with fixative containing PFA alone. Tissues fixed with fixative containing 0.5% GA at the perfusion and postfixation steps showed specific immunogold staining for GABA. The results of the present study indicate that GA concentration is critical for immunoreactivity to antigens such as TRPV1 and GABA. This study also suggests that the appropriate GA concentration is 0.5% for multiple immunostaining with peroxidase labeling for TRPV1 and immunogold labeling for GABA.

When morphogenetic proteins encounter special extracellular matrix and cell-cell connections at the interface of the renal stem/progenitor cell niche / 대한해부학회지

Reciprocal exchange of morphogenetic proteins between epithelial and mesenchymal cells in a stem/progenitor cell niche results in formation of a nephron. To maintain diffusion of morphogenetic proteins, it is assumed that a close contact exists between involved cells. However, recent publications underline that both types of stem/progenitor cells are separated by a striking interface. To explore this microarchitecture in detail, neonatal rabbit kidneys were fixed in traditional glutaraldehyde (GA) solution for transmission electron microscopy. For contrast enhancing specimens were fixed in GA solution including cupromeronic blue, ruthenium red or tannic acid. To record same perspectives, embedded blocks of parenchyma were cut in exactly orientated vertical and transverse planes to lining collecting ducts. Electron microscopy of specimens fixed by traditional GA solution illustrates a spatial separation of stem/progenitor cells and an unobstrusively looking interface. In contrast, advanced fixation of specimens in GA solution including cupromeronic blue, ruthenium red and tannic acid unmasks earlier not visible extracellular matrix. In addition, projections of mesenchymal cells covered by matrix cross the interface to contact epithelial cells. Surprisingly, the end of a mesenchymal cell projection does not dangle but is enclosed in a fitting sleeve and connected via tunneling nanotubes with the plasma membrane of an epithelial cell. Regarding this complex ensemble the question is to what extent illustrated cell-cell connections and extracellular matrix are involved in communication and transmission of morphogenetic proteins during induction of a nephron.

Eficácia da esterilização de limas endodônticas com organizadores Endo-File® / Effectiveness of sterilization of endodontic files with Endo-File® organizers

A presença de microrganismos exerce papel importante na etiologia das patologias endodônticas. Para tanto, alguns cuidados devem ser tomados na execução e sucesso do tratamento endodôntico. Dentre esses, estão a desinfecção e esterilização do instrumental e material a serem utilizados. O meio mais utilizado para a esterilização é a autoclave, pois é altamente efetivo e barato. Encontra-se no mercado nacional organizadores de limas endodônticas Endo-File para autoclavagem que visam agilidade do processo de instrumentação, fácil manutenção e prevenção de contaminação cruzada. Este estudo tem como objetivo analisar, in vitro, a eficácia da esterilidade de limas manuais ao longo do tempo dispostas nesses organizadores. Para tanto, foram utilizados dois organizadores (Romidan, Israel) e 24 limas endodônticas do tipo K. Para a análise microbiológica, as limas foram contaminadas com bactérias Enterococcus faecalis e inseridas nos 12 cilindros dos organizadores e o conjunto esterilizado em autoclave. Logo após, foram semeadas em meio de "Brain Heart Infusion Agar" (BHI Agar) e levados à estufa bacteriológica mantidas sob temperatura variável entre 35°C e 37°C, por 48 horas. Os resultados obtidos permitiram afirmar que os organizadores são eficazes em organizar e esterilizar limas endodônticas e são capazes de mantê-las aptas para o uso clínico por até 30 dias.

Presence of microorganisms plays an important role in the etiology of endodontic pathologies. Therefore, some precaution must be taken in the performance of a successful endodontic treatment. Disinfection and sterilization of instruments and materials to be used are some of those safety measures. The autoclave is the most commonly used method for sterilization since it is highly effective and cheap. In the Brazilian market it is possible to find the Endo-File, endodontic files organizers for autoclaving that aim at expediting instrumentation process, simplifying maintenance and preventing cross-contamination. This study aimed to examine, in vitro, the efficacy of hand files' sterility over time when arranged in these organizers. Two organizers (Romidan, Israel) and 24 endodontic files of type K were used in the analysis. For microbiological analysis, files were contaminated with Enterococcus faecalis then inserted into the 12 cylinders of the organizers and autoclaved. After, being were sown in the midst of "Brain Heart Infusion Agar" (BHI Agar) and brought to bacteriological incubator, they were maintained at variable temperature between 35°C and 37°C for 48 hours. The results allow us to affirm that the organizers were effective in organizing and sterilizing endodontic files, and are able to keep them suitable for clinical use for a 30 days period.